Category: Education

Today’s need TO preserve the environment

Pollution is one of the evils brought about by the growth of science and technology. The undesirable change in the properties of nature is called pollution. It harms the health and life of humans. The man is responsible for pollution by adding impurities into the air, water, and soil. By polluting air, we polluting our breath. Our health depends on the quality of the air we breathe. Factories and industries let out the smoke. Toxic gases found in the smoke that pollutes the air. The intake of polluted air causes diseases like lung cancer, asthma, and nervous disorders. Due to pollution, the ozone layer gets depleted. It results in an entry of harmful ultraviolet radiation into the earth causing diseases like skin cancer. water gets polluted when toxic and acidic wastes are disposed of into it. This will certainly contaminate water. These will cause diseases such as jaundice, typhoid, cholera, dysentery etc. Unpleasant and loud sounds which make discomfort is called Noise pollution. It will cause psychological tension, nervousness. Land pollution is caused by the accumulation of non-degradable pollutants such as plastics, polythene bags etc. And lead to lost its fertility.

The first and foremost step is to create awareness about the harmful effects of pollution. Factories should adopt strict pollution control measures. The use of non-conventional energy sources such as solar energy and wind energy should be encouraged. Bio-fertilizers must be used in agriculture. Deforestation should totally be stopped. Green plants are to be cultivated around the industries. This will ensure not only the reduction of noise pollution but also render fresh air. Unless some measures are taken to control pollution at its source, the pollutants will certainly pose a hazard to human health or threaten the efficiency of agricultural production. Pollution-free society will be the best legacy that we can hand down to posterity.

The Gentle Fight?

Do not go gentle into that good night,
Old age should burn and rave at close of day;
Rage, rage against the dying of the light.

The first stanza opens with the speaker pleading to his dying father not to give up. He requests him to keep fighting, to keep burning and raving even when the day ends, to burn brightly even when the light starts to flicker and all hope seems to end.

Though wise men at their end know dark is right,
Because their words had forked no lightning they
Do not go gentle into that good night.

The poet says that the wise men know that death is a part of the inevitable circle of life but they should keep fighting for their words had not yet made a mark on this world, for they were yet to prove so much more. Thus the speaker says that no matter what people should keep fighting, to make a difference, to make their presence felt.

Good men, the last wave by, crying how bright
Their frail deeds might have danced in a green bay,
Rage, rage against the dying of the light.

The poet talks of the ‘good men’. The good men are those who may have done a lot of good for the mankind but they feel that their deeds might have been in vain and if they had got a little more time their deeds might have been successful like dancing in a green bay. Thus during the last moments of their life like the last wave, they should also rage against all odds.

Wild men who caught and sang the sun in flight,
And learn, too late, they grieved it on its way,
Do not go gentle into that good night.

There are some men who have spent their lives wildly by enjoying, celebrating and cherishing the beauty of life. They sang and learnt later that they have wasted their time and could have accomplished so much more. The sun in-flight’ means the moving sun that continuously goes from the east to the west. The wild men busy in cherishing the sunrise fail to realise that they are nearing the end of their life.

Grave men, near death, who see with blinding sight
Blind eyes could blaze like meteors and be gay,
Rage, rage against the dying of the light.

Grave men possibly refer to ailing people who are nearing to death and they lose their eyesight yet they remain strong in their mind. They realise that even though they are blind they could be passionate and blaze like meteors and be happy. Thus they also try to rage and fight against death.

And you, my father, there on the sad height,
Curse, bless, me now with your fierce tears, I pray.
Do not go gentle into that good night.
Rage, rage against the dying of the light.

The poet now addresses his father directly who is sad and is nearing his death. He asks his father to cry passionately which would be a form of catharsis and thus it would lighten his father’s sadness and that will be both as a curse and blessing for him. He requests him not to go gentle into the good night and thus he should fight and keep fighting against the flickering and feeble light of the life given to us.



Are those in power responsible for misery of poor in INDIA

No single reason is upheld for misery for poor in India. Poor suffer daily because of lack of employment, improper medical and educational infrastructure, uncertain implementation of beneficial policies and corruption. If we connect the dots well, all these point to the same culprit the system . System itself is a hierarchy of those in power, consisting of The Rule Makers (Ministers and the political circuit), those responsible for execution (The bureaucracy), and The Guardians of Justice (Judiciary and Police). As soon as we start talking about responsibility among them, stones start flying making indecent curves. Among this pelting of stones the only victims are the poor, who cannot afford to have shields. Shield of money, shield of power, shield of social status.

Let me get down to facts

1. Abhishek Verma arms deals scandal (AgustaWestland)

     In 2006, Abhishek was accused of receiving benefits of approximately $200 million, through a $5 billion Indian military deal involving the Indian government’s acquisition of six Scorpène-class submarines.

2. Wakf Board land scam

This scam most possibly is the biggest land scam in the country till date, the Karnataka Wakf Board land scam involves the alleged misappropriation of land allocation worth Rs 2k billion.



3. Telgi scam

Telgi Appointed 350 fake agents to sell stamp papers to banks, and stock brokerage firms. The scam amount involved was pegged at Rs 200 billion.

4. The ‘Coalgate’ scam

While initially the loss to the exchequer was pegged at Rs 10.7 lakh crore, the final report stated that the scam amounted to Rs 18.6 lakh crore.

5. 2G Spectrum scam

This scam surfaced, it was revealed that the state, in 2008, had undercharged mobile telephone firms for frequency allocation licenses and credentials. The CAG of India stated that “the difference was Rs 1.76 trillion”.

6. Adarsh Housing Society scam (Housing Society)

The episode of Adarsh Co-operative Housing Society reveals how a group of select powerful officials, placed in key posts could subvert rules and regulations in order to grab government land  for personal benefit.

7. Commonwealth Games scam (CwG Scam)

The CwG scam took India by storm in 2010 involving a game of around Rs 70,000 crore. Since its inception, the games were in grip of a maze of corrupt deals. This included unduly contracts, cheating, and forgery.

8. Satyam scam (India’s Enron scandal)

‘India’s Enron scandal’, the 2009 corporate scam shook the Indian shareholders community. Ramalinga Raju, the Chairman of SCS, confessed that he had foul played with the company’s accounts, inflating the revenue and profit. The Scam involved Rs 14,000 crore.

The above mentioned are nothing but example of exploitation of our beloved country by those in power. We are common citizens of this fake civilized society, we as a society too are responsible for those who suffer, but the indifference in our attitude can be identified similarly with those we blame.

So as to conclude, I wish to say that in this game of fixing responsibility, the poor the sufferer is somewhere sidelined, we miss out on the essence of social justice. We should start owning our mess and work in accordance to sort in out. To develop the world we need to help those lagging behind. 

Trends in Contemporary Public Relations

Public Relations: Why It Matters - Activated Growth

Public Relations is regarded as the cornerstone for individuals, companies and start-ups to establish their credibility in the market. Public relations is rapidly changing, evolving and adapting new methods such as engaging videos, online content, bloggers outreach, influencers and many more such techniques to achieve maximum limelight. There are a few major trends that are easy to spot. These are:

  1. Big Data: New age public relations have become ever dependent on data. Audiences today are tech-savvy they are highly dependent upon technology for their day-to-day activities. Digital and social media communications have opened up a new channel through which PR firms can reach a brand’s target audience. The business is headed into a new direction where devising and executing digital and social media campaigns are imperative to create brand awareness.
  2. Influencer Outreach: The world today consists of people who are trusted and highly followed by people. Bloggers too have become extremely influential and those who are credible can be the go-to person when you need to send the word out about your company. In the past few years, influencer outreach has garnered immense limelight in the field. Targeting relevant influencers is an important segment to reach a wider audience.
  3. Importance of leadership: Earlier, the role of imparting thought leadership content was confined only for top-level executives such as the CEO, COO, and CMO, etc. Now, this trend will gradually shift to other leaders and consultants within the company who will share note-worthy and interesting insights with the public. The emphasis will be on people of lower leadership and making them essential to the company. This will help a brand target a wider, more diverse audience and share more content. Also, encouraging employees to take an active thought leadership role will aid companies to grow their own personal brand.
  4. Use of analytics: Companies in modern public relations are embracing numbers and analytics. Companies, including the tech, market themselves based on social impact, and they do their research, collect their data from both prospective and existing clients, and then put some sense in those data. Putting them into perspective in the form of website traffic, a number of leads, etc. makes sense of the drill of analytics.
  5. Customer satisfaction: The final outcome of any PR exercise has to be customer satisfaction. It is mandatory to ensure that the product or service has to be perfect. Startups looking for press coverage after developing the minimum viable product (MVP) should ensure that the core part of that MVP executes the idea and solves the problem it set out to solve first.

Women’s Rights Are Human Rights

On 26th August, Women’s Equality Day is celebrated in the United States to commemorate the 1920 adoption of the 19th Amendment to the United States. This amendments prohibits the states and the federals government from denying the right to vote to the citizens of United States on the basis of sex. Women’s Equality Day was first celebrated in 1973. On this day an official holiday is also given to celebrate it. This day is celebrated to remember the suffragists and the efforts made by the women’s for their rights.

How in United States Women’s Equality Day celebrated? This further as follows:

  1. On this day National Organization of Women held huge rallies and marches in U.S. cities with the use of huge banners on the Statue of Liberty to honored the women’s who made voting possible for the women’s.
  2. This day also honored women who labored for long hours during the World War 1 whereas men were in battlefields. This honor are for the women who worked in factories of ammunition, weapons, supplies, etc.
  3. This day was introduced by Congresswoman Bella Abzug who made it possible through a Presidential Proclamation.
  4. Various ways are adopted to celebrate this day. By writing a thank you letter to influential women, children who were learning about the historical female figures, and by participating in parade or activities organized by the local government.

Some of the facts related to Women in America:

  1. Wyoming is the first state which grant women the right to vote.
  2. Nurse Clara Barton establish the American Red Cross.
  3. The first female mayor of American town, Susanna Madora Salter was Argonia and Kansas.
  4. The first American women Martha Washington to appear on U.S. postage stamp.
  5. Charlotte Woodward is the only suffragette who got witness women to being able to vote.

By celebrating the day for women’s equality America shows their respect for gender equality. Not only in America Women’s Equality day is also celebrated in many more countries. As men’s are important for the country’s progress than women’s are equally important for country’s progress. There is no meaning of celebrating these days if you do not understand the crux of the meaning of equality. A modern world needs a modern thinking. And gender equality begins with an individual mind or thinking. It is an individual perception of treating another person. This type of thinking cannot be changed so quickly. It needed to be properly looked at. They are need to tell about the equality, the importance of equality and the perception need to be changed.

Representation of women on various boards will give powerful messages to all the women’s who are left behind. A good message for the women’s who fight for the rights of the women’s and their struggle will not go on ease. People need to study that struggle as well as messages behind their struggle. Gender equality is important yesterday, today and also rest of the days.

“Both men and women should feel free to be sensitive. Both men and women should feel free to be strong.”- By: Emma Watson

“Can Volcanoes be beneficial for us?”

Population has seen a  great hike from last century and is still growing with a rapid speed. We the need for natural resources to feed, clean water to drink, clean air to breath and land to live are significantly decreasing. The waste production is also increasing as we are using most of plastic products and things made from them and just throwing them away. But also there is some other junk and waste which gets accumulated and takes time to decompose. We humans usually throw our day today waste in our bins or public bins as on the road side to keep our home and surrounding clean. Garbage truck then takes the garbage and throws it outside of the city area, away from humans. This has been a chain process of years of chain process and we have significantly accumulated a lot of trash . This has just piled up and is gathering most of our land for decomposing or just keeping it. Which is an issue as we do require much land for building homes, offices for work, and many more. Also it is not good for our environment too. 

So what could be the best option to do with these trash mountains? Well some scientist did come up with the option to dump most of this junk into volcanoes . But the question which arises is “that would it be beneficial and successful leaving no junk behind and thus saving us?”  Volcano consists of hot lava which is expected to come from the earth core. These are sources which help this lava and gases to escape the surface. The lava is considered to be hot and has 1700 degree celsius, hot enough to melt anything and absorb in it. So it could be considered a better option to throw all the junk and waste in it which would get dissolved in the heat and thus we can get rid of all the waste. 

The problem with this solution of getting rid of the waste using this way is to:

  1.  Find the presence of active volcanoes and their strength. Most of these are not present near mankind and we do need to spend a lot of research and resources to find these. 
  2. The other problem which could be an issue, is the presence of harmful gases which can cause health issues if any individual inhales them. 
  3. Also the problem or air pollution still remains, as we know lava is hot, it would be burning components when thrown inside it. This material consists of plastic bags, containers,cans, and various other waste materials which is enough to release carbon content in air and thus would be the reason for most harmful gases. 

“So it is a straight “No” to the idea of throwing into a volcano and getting rid of these. So what could be the better options for us to do. Most often it is advised to reuse most of the things which can be. But about others thinks which cannot be reused and sting while present near us. Research work and various technologies are being made to get rid of this kind of waste soon so as to save us from the lack of resources and thus build up a better future, seeking no waste in our surrounding rather beautiful views far Hill site and fresh and pure air all around”. 

#Concealed Minds✨

They heard you cry . And they still laughed .Upon seeing your battel scare , They only pretended to care.All you could do was sit alone, Under the blanket or in the corner, crying , About all ifs, but &whys.Realizing no one cared about you trying. They meat the world to you And you meant like a mole on a hlii , You kept asking yourself was if all worth When all yours feelings were nothing but hurt. Was it okay to quit you wondered, When you saw the sly outfit And then you remember what your mother taught you, A bitter truth is better than a thousand lies.

Cobalt v/s Titanium Drill Bits

If discussing power tools Drill bits are an important feature. The most durable drill bits are cobalt and those coated with titanium. There are a few notable differences between cobalt and titanium drill bits. These can make a difference for your project.
It’s important to know for your impact driver what is the right drill bit for the job.


• Cobalt Drill Bits
Cobalt drill bits are made to last long. They’re produced by a mixture of cobalt and steel. Drill bits are available with different concentrations of cobalt. An M35 grade cobalt drill bit set contains 5% cobalt. Whereas M42 grade cobalt drill bits contain 8% cobalt. A high amount of cobalt makes drill a bit more brittle, but more heat resistant.
Cobalt drill bits are more expensive, but they offer good value for money. Cobalt bits can be sharpened, which means they can be used extensively. They’re also made tough, meaning they will not quickly fade out. They’re golden in color, making them easy to spot amongst your tools.
They’re also versatile, suitable for commercial use and engineering
As well as for home use. They can be used on materials, such as stainless steel and cast iron.
They can cope with up to 1,100 degrees Fahrenheit. This means it can withstand spinning against other metals without being damaged.
They can be used with softer materials, but with caution. For example, if you’re using cobalt drill bits on wood, you run the risk of splitting the wood. This is because cobalt drill bits do not have a brad (a sharp piece on the end that stops the drill bit from slipping). You can split or damage your project if you use a drill bit that is too tough.
• Titanium Drill Bits
Titanium drill bits come in different varieties. They are not actually made of titanium – their core is steel. They’re actually coated in different types of titanium. Titanium Nitride coating (TiN) is durable and tough. It is also able to withstand high temperatures.
Titanium aluminum nitride is another type of coating. TiAIN can extend the life of a tool by four or five times, making it an upgrade from TiN.
TiCN is very tough. It works well in machines that encounter high mechanical stresses. It can be used with adhesive and abrasive materials.
Titanium drill bits are heat resistant up to 1500F. The coating acts as a barrier between other types of metal. They are tough and able to drill into hard materials. The coating makes them heavy-duty, durable, lasting longer than a standard drill bit.
They work well with harder types of wood. They can also be used on plastic and PVC. They work very well on steel, copper, brass, or aluminum materials, too. They work well in metal cutting machines, drilling precise holes.
Yet, they will begin to lose their coating if sharpened, you lose the benefit of the coating over time. This means that, in the long run, you may end up having to replace titanium drill bits much more quickly.
• THE DIFFERENCES BETWEEN COBALT AND TITANIUM BITS?
Cobalt and titanium drill bits have various similarities. They can even be used for many of the same applications. But their slight differences are what can make a major impact on your project.
The differences emerge from the way these drill bits are made. Cobalt and titanium don’t behave quite the same. Cobalt and titanium coatings make drill bits behave differently from each other.
Titanium drill bits are generally coated with TiN or TiCN. The coating is to boost the strength of the drill bit, while allowing it to resist wear and tear, even at high speeds.
Cobalt bits do not have a coating. Instead, they’re produced with a mixture of steel alloy and cobalt. The cobalt is used to increase the strength of the bit. It also keeps the bit from getting too hot.
The significant differences between a cobalt and titanium drill bit:
TEMPERATURE
Both cobalt and titanium drill bits do a great job dissipating heat. Both save your materials or bits from damage.
Cobalt dissipates heat over the contact surface. Which allows it to resist heat at high speeds.
Titanium coating works as a barrier between the steel bit and the work surface. Titanium works even better than cobalt at resisting heat if the coating is undamaged.
COST
Prices vary depending on the manufacturers of the bits. You have to pay more for cobalt drill bits than titanium. Cobalt bits are more durable, so you may pay more for them, but you’ll likely get an extended lifespan from them.
COMPATIBLE MATERIALS
Both cobalt and titanium drill bits are capable to work with almost all other materials. Titanium and cobalt both have materials that they work better with than others.
The titanium drill bit is a better choice for soft materials, like soft metals, wood, and plastic. The type of titanium coating also makes a difference. Titanium carbonitride coating can handle tougher materials than titanium nitride coating.
Cobalt drill bits are excellent for tough materials, like cast iron and other metals.

• Advantages of using the Cobalt Drill Bit
There are a lot of advantages that make the cobalt drill bit outclass most bits.
· Durability
Cobalt has higher durability than most bits. It allows you to sharpen it plenty of time before it breaks. It is an incredible advantage to avoid investing too much money buying new ones every time.
· Versatility
Using the cobalt drill bits which you can easily get at a Drill Pipe For Sale market, for working on soft materials might be a little bit too much. It is a relief to know you have them available to work through as many materials as possible.
In the end, these bits are high-priced items, and you may as well use it as regularly as possible.
· Higher Resistance
There aren’t many drill bits that can match the cobalt bit’s efficiency while working on hard metals. Dealing with stainless steel or cast iron is not an issue for this type of bits.
• Advantages of Using the Titanium Drill Bits
· Lower Price
The titanium drill bits come with a lower price than the cobalt bits. It is an advantage for people who are tight on budget.
The low price makes it possible to dispose of them and get new bits when they do not function properly anymore.
· Excellent Bit for Soft Materials
If you’re working on soft materials, like soft metals or wood, the titanium drill bit is what you need. It may not have resistance to harder materials, but that doesn’t highlight it is not efficient.
The titanium drill bit is capable of piercing through most of the materials.
· Lasts Longer than Regular Bits
Titanium bits may not match the cobalt bit’s longevity, but they’re still better than regular drill bits. When it comes to durability, the titanium bits come in the second-best position.
• Disadvantages of Cobalt Drill Bits:-
Not all good comes without bad, and the main disadvantage of the cobalt drill bit is its cost.
The high price keeps the user from using them as regularly. If they get damaged, replacing them may burn a hole in the pocket.
To get the best out of cobalt drill bit, you’ll need to invest in a good sharpening tool. There’s no point in throwing the cobalt bit away once it gets dull. Instead, you must re-sharpen it as much as possible.
• Disadvantages of Titanium Drill Bits:-
A Titanium bit is a reliable tool until the coating expires. After the coating wears off, the bit remains another regular high-speed steel tool.
Another disadvantage is that these bits are not good for hard abrasive metals. Stainless steel and cast iron among others will wear off the bit’s coating.
• Conclusion
Which drill bit is better for you, depends on what materials you’re going to be drilling shortly? If you will be working with hard metals, like cast iron and stainless steel then cobalt bit is the bit for you. Its superior durability and the ability to sharpen the bit makes it the right choice. If you’re going to be working with softer metals and wood, then you won’t go wrong with a titanium drill bit.
If you’re looking towards durability, you’ll be better off getting a cobalt drill bit. You need to keep in mind that the price of a bit sharpener puts up the price. You can buy titanium drills buts for a far lower price. If a price is an important factor, then titanium drill bits will serve the purpose.

If death strikes before I prove my blood,i swear i”ll kill death….

A soldier is a one who fights as a part of an army for the nation.A soldier can be conscripted or volunteer enlisted person a non -commissioned officer, or an officer.A soldier is a pride of the nation he defends the honour of his mother land with his life and blood.He has to rise above his own self to defend his nation .His profession bring best quality in him like chivalry, discipline, team spirit, loyalty,pro-active news, stead fastness.The life of soldier is very tough and full of discipline they are physically and mentally strong they are pro-active in order to face any battle.His performance in the threaters of war has been heroic and daring.He is the finest spiceman of humanity who is given supreme sacrifice of his life for the lives of his countrymen. He has to bear the tryannies of nature and in thunder lightning, or rain, extreme hot or cold ,in deserts mountains or seas , day and night fight continuosly for the know of his nation.He has to sacrifice his family life, he has to stay away from his children only to protect and save life of every citizen.His life is based on “”selflessness” and “sacrifice”.A soldier is the watchdog of the nation and is ready to perform any duty with which may entrusted,even at cost of his life.Their’s not to make reply, there’s but to do and die.

“Maintain cleanliness – Remain happy and healthy.”

Who doesn’t like to live in a clean and neat home? We all regularly clean our house to keep it free from the dirt. We keep ourselves clean and follow good hygiene practices as well.

Just like we think about cleaning our home and body, the same way we should think of cleaning our environment. This is equally important because keeping cleanliness around you has many benefits.
Here are some benefits of cleaning:

● Cleaning is a great stress buster. Transforming a dirty place to a cleaner one can change your mood and also give you relief from your tension or stress. Once you have finished cleaning, you feel better, happy and relaxed.

● Living in clean surroundings can keep you away from different types of diseases and infections. This is because, cleaning kills majority of the bacteria, germs, viruses residing in the environment which are the main reason for spreading various kinds of illnesses. Personal hygiene is equally important to protect yourself from diseases.

● When you work in a cleaner environment, you become more productive. You can be more focussed towards your work and come up with new and innovative ideas for your work while sitting in a cleaner room. If your room is cluttered and messy, you can’t concentrate on your job properly.

● Residing in a clean place can make your thoughts positive and keep you away from the negativity. Clearing the dirt around you also cleans all the dirty ideas in your mind and helps you to have a positive approach for life.

● Cleaning can also prove to be good exercise. There is a lot of physical work involved in cleaning that can help you to burn your calories, as it involves the use of the entire body for removing the dirt from different places.

● Living in a clean and tidy place will calm your body and soul. You feel like living and resting in that place and relax for some time. It will give you a break from your busy life and also take you away from the chaotic world.

● If you keep your surroundings and home clean, you can reduce the workload of the cleaners and servants. You can help them by making their work easier. Keeping your city or state clean can affect tourism and employment positively.

● When you live in a tidy and organized home, you know where your things are kept. You can find them quickly and without getting tensed whenever you want them urgently. This helps to save your time.

Hence we can conclude that cleanliness has got many advantages. You get various physical, economical and mental benefits from it. Practising cleanliness around you will not only benefit you but also the surrounding people. It is a habit that has no side effects.

So, all of us should keep our home, city, state, country and the entire world clean and tidy. We shall contribute in our own way to maintain cleanliness. Our small contribution can be beneficial for all.